![](https://www.frilo.eu/wp-content/themes/blank/img/frilo-product-mockup.jpg)
Shear Panel Stiffness
ST13
The ST13 program is used for the calculation of the shear stiffness and rotational spring stiffness as well as of the translational restraint of trapezoidal sheets as per DIN 18800.
Discover now more programs from the section Steel!
SHOW MOREMaterial
For the beam section:
- General structural steels: S235, S275, S355
- Fine-grained structural steels (S275N, S355N, S275NL, S355NL)
- Quenched and tempered steels (C35N, C45N)
- Cast steel (GS200N, GS240N, G17Mn5QT, G20Mn5QT, GJS400-15, GJS400-18-LT, GJS400-18-RT)
- User-defined steel
Structural system
Modelling of a roof or wall construction (number of spans, span length and height) including the components to be supported (beams) and definition of the size and position of the stabilising component (shear panel).
Cross-sections:
- Trapezoidal sheet section in positive or negative position, make:
- Fischer
- Hoesch
- Ferroval
- Haironville
- MPB Haironville
- PAP
- Salzgitter
- Thyssen
- Beam sections: I-sections and U-sections as standard steel shapes
- I-section, unequal I-section, rectangular solid cross-section and U-section as user-defined shapes
Fastening of the trapezoidal sheeting:
- Bolted connection on the upper or lower flange
- Bolt spacing in each stiffener or in every second stiffener
Loads
- Structural load and suction load are available for selection.
General
The program does not only calculate the translational and rotational spring stiffnesses of trapezoidal sheets but also verifies whether the fixity against lateral shift and/or torsion is sufficient in accordance with DIN 18800-2, (308) or (309).
Document file formats
- Word
- Printer
Output
- User-defined output scope
Import options
- ASCII-file
Export options
- ASCII-file
- Word
- DXF-file
- EMF-file
Steel construction
- DIN 18800
Support resources
News
![Die geschwungene Fassade der Konzernzentrale bei Nacht. (©Thilo Ross)](https://www.frilo.eu/wp-content/uploads/DE/Bilder/News/Referenzprojekt/HeidelbergCement/Die-geschwungene-Fassade-der-Konzernzentrale-bei-Nacht-©Thilo-Ross-768x432.jpg)
Corporate headquarters as reinforced concrete skeleton structure
With the construction of a new corporate headquarters, Heidelberg Materials has demonstrated the remarkable range of reinforced concrete as an attractive building material. FRILO and Allplan were used by the structural engineers.
![](https://www.frilo.eu/wp-content/uploads/DE/Bilder/Landing-Pages/R-24-2/Desktop_RSX-SFB_1920x1080-768x432.jpg)
FRILO launches version 2024-2 with powerful updates for structural analysis and design
Highlights include the optimised design of Schöck Isokörbe®, the advanced integration of DC foundation engineering programs into the FRILO environment and new RSX interfaces for detail verifications in steel construction.